English

中文
  • Lime Shaft Kiln
  • Lime Shaft Kiln
  • Lime Shaft Kiln

Lime Shaft Kiln

  • Processed Materials: Limestone, dolomite,chalk,Bauxite, mullite,etc.
  • Applications:Cement industry, steel metallurgical industry, chemical industry, building material industry, etc.
  • Capacity:50-500tpd
  • Heating Fuel:Gas, Coal , Oil

Quantities can be customized

  • Introduction
  • Working Principle
  • Features
  • Parameter
  • Inquiry

Lime shaft kiln, which also called vertical kiln, due to the vertical position of its kiln shell does not rotate,  is always used to produce the products, such as cement, refractory materials (bauxite and mullite), lime, etc. Thus, the commonly used shaft kiln is also known as cement vertical kiln, lime vertical kiln and so on.

Lime  shaft kiln has many forms, the vertical kiln with continuous operation is mostly adopted. Its heating fuel includes coal, nature gas and coal gas,and oil. The solid fuel can be added together with the limestone, it can also be burned into gas outside the kiln and then introduced into it. The former is called mixing shaft kiln, the latter is called gas kiln and oil kiln. Mixing shaft kiln has the advantages of large production capacity, fully mechanized procedure, high concentration of kiln gas, high thermal efficiency, good lime quality and so on, so it is often adopted.

With the development and application of shaft kiln, Yuhong lime shaft kiln, with its small investments and yield quick returns, and the continuous improvement of the lime shaft kiln technology, it is still widely used in china and foreign areas, such as Southeast Asia area, Central Asia area, the Middle East area and Africa area, etc.

 

After mixed well, blocks of limestone and coke are put into the kiln above. They do top-down movement and go through three areas: preheating zone, calcining and cooling zone. Preheating zone is located in the upper part of kiln, accounting for 1/4 of the total height, and it uses the hot kiln gas from the calcining zone to preheat and dry the limestone fuel and evaporate the moisture. When the temperature exceeds 70 degrees, furnace burden starts to burn. Hot kiln gas conducts nearly half heat to furnace burden, and its temperature drops to 50-100 degrees, discharged from the kiln crown. Calcining zone is located in the middle of the kiln, accounting for 1/2 of the kiln height. To avoid over-sintering, this zone temperature should not exceed 1200 degrees. Cooling zone is located in the bottom of the kiln, about 1/4 of the total kiln height, its main role is to preheat the air in the kiln to cool the hot lime to 30-60 degrees, not only recycle the heat but also protect the kiln gate from burning-out.
The main technological conditions to maintain the normal operation of lime kiln is to maintain the normal and stable temerature distribution inside the kiln.
1. Using energy-saving way of calcination.
2. Dust removal system makes flue gas and dust keep clever collocation flue gas emissions meet standards;
3. Scientific process the waste heat can be most effectively used.
4. Distributing equipment has unique structure and uniform distributing quantity.
5. Uniform wind supplying maintains good furnace condition.
6. High automation level.

 
Capacity Effective volume Effective height Cross section diameter Limestone size Heat consumption CaO Active Degree
(t/d) (m3) (m) (m) (mm) (KJ/kg) (%) (ml)
100 98 20 Ø2.5 40~80 <4600 >90 >300
120 141 20 Ø3.0 40~80 <4600 >90 >300
150 202 21 Ø3.5 40~80 <4500 >90 >300
200 301 24 Ø4.0 40~80 <4500 >90 >300
300 397 25 Ø4.5 40~80 <4400 >90 >300
400 491 25 Ø5.0 40~80 <4200 >90 >300
500 735 26 Ø6.0 40~80 <4200 >90 >300

Please Feel free to give your inquiry in the form below.We will reply you in 24 hours.

Contact us now if you have any question about our company and products. Any of your inquiry and suggestion will be highly appreciated. We will keep your information completely private.

info@cnyhzg.com+86-371-86688302yuhongmachine

  • Name :

    Country :

  • * Mail :
  • Tel :
  • * Message: