Bentonite Raymond mill is suitable for processing materials with hardness below Mohs 9.3 and particle size of 120-1340 mesh. Bentonite is a soft non-metallic mineral. If the size of raw ore is relatively large, the feed inlet of the pulverizer is limited. After preliminary crushing, it can be sent to the pulverizer for grinding and processing, so as to select the finished products that meet the fineness.

Bentonite belongs to clay rock. It is an important non-metallic mineral. Its color is generally white and light yellow. Due to different impurities, other colors may appear, such as pink, light gray and light green. Bentonite has very good adsorption and expansion characteristics. It can generally be used as a stabilizer, purification and decolorizing agent, suspending agent and waterproof material. However, in the fields of agriculture, light industry and chemical industry, It is also widely used.

The vulnerable parts of the bentonite Raymond grinding equipment are cast with high-quality wear-resistant materials, which have relatively small loss in the pulverizing work. The equipment has a long life and low consumption cost in the use process. The passing rate of bentonite grinder can reach more than 99%, but this is incomparable with many mechanical equipment. Moreover, the mechanical equipment has low power consumption and low energy consumption.

The primary purpose of the bentonite grinding production line is crushing, because the Mohs hardness of bentonite is 1-2, which belongs to the soft non-metallic ore, and it needs to be preliminarily crushed.

Then drying, which can be naturally dried or heated to remove moisture. However, in order to prevent the performance of Bentonite from changing due to the structure change of montmorillonite, the drying temperature should be lower than 250 ℃, and the time should not be too long.

The second is grinding, in order to meet the high fineness requirements of the plastics, paper and rubber products industries. Generally, the bentonite grinder can select European version grinder, overpressure trapezoidal mill and vertical grinder for grinding.

However, the general application field of bentonite requires the fineness of powder to be 200 mesh. The above trapezoidal mill, European mill and vertical mill can meet their price requirements. Each series of mills has different models and prices. Users can choose appropriate equipment according to specific production needs,

Yuhong Heavy Industry Co., Ltd. is a company specializing in the production of all kinds of stone mills. The price is reasonable, the quality can be seen, the production output is high, the service attitude is good, and the equipment model is comprehensive. The annual production of 20 tons of bentonite mills is simple, the equipment volume is small, the investment is small, the work is stable, and the equipment is flexible and convenient.