Bentonite mill is a common equipment in operation, and also one of the crushing equipment with high efficiency in ore crushing production. In the production process of bentonite mill, due to various factors, even the same equipment, its production capacity will be different. Due to different models, the capacity of various aspects of the equipment is also different. Let's understand that there are many models of bentonite mills. What are the differences in the capacity of each model of equipment?

The more serious the abrasion of the bentonite mill on the equipment in the crushing process. If the hardness of the material is too large, it will increase the grinding difficulty of the bentonite mill, which will inevitably prolong the grinding time, thus reducing the grinding efficiency and affecting the production capacity of the bentonite mill. When the moisture content of the materials is high, it is easy to form adhesion during the operation of the bentonite mill, and it is also easy to cause blockage in the feeding and conveying process, thus reducing the production capacity of the bentonite mill.

There is also the fineness requirement of the finished product. If the user has higher requirements on the fineness of the crushed materials, it will increase the crushing difficulty of the bentonite mill, prolong the crushing time, and then reduce the production capacity of the bentonite mill. Therefore, it is necessary to select appropriate crusher equipment according to the fineness requirements of users to avoid affecting the production capacity of the crusher.

What are the differences in the capacity of each model of equipment? Generally, the following points are included:

1. 3r3016 type: the feeding particle size of bentonite mill is ≤ 25mm, the finished product particle size is 0.125-0.044mm, the rotation speed is 178R / min, and the output of different material fineness shifts is 3-34t.

2. 4r3216 type: the feeding particle size of bentonite mill is ≤ 25mm, the finished product particle size is 0.125-0.044mm, the rotation speed is 130R / min, and the output of different material fineness shifts is 3-38t.

3. 5r4119 type: the feeding particle size of this mill is ≤ 30mm, the finished product particle size is 0.125-0.044mm, the rotation speed is 105r / min, and the output of different material fineness shifts is 8-78t.

4. 6r4525 type: the feeding particle size of the mill is ≤ 30mm, the finished product particle size is 0.125-0.044mm, the rotating speed is 82r / min, and the output of different material fineness shifts is 16-176t.