In recent years, it has been found that many industries still need to break materials. It is mainly used for medium-sized crushing of various ores and large materials, and is generally widely used in refractory materials, mines, highways, building materials, railways, water conservancy, hydropower and chemical industries. It is usually used to break limestone, coal, gypsum and other brittle materials below medium hardness.

Then, what are the models of ore crushers and how do the working principles of different models of equipment? Here is a simple answer from Yuhong Xiaobian.

First, according to different equipment models, the crusher is divided into impact crusher, cone crusher, jaw crusher, impact crusher and other mechanical equipment. However, different working principles are applied in different material processing processes.

(1) The heating method of the hammer crusher cannot be used. In order to prevent bonding materials, a screen plate shall be set at the bottom to increase the possibility of clogging and adapt it to the feeding range of the grinding equipment. Roller crushers are generally divided into single roller, double roller and multi roller crushers according to the number of rollers. They are generally suitable for coarse crushing, medium crushing and fine crushing, such as cement clinker, coal, limestone, feldspar and other materials below medium hardness.

(2) The jaw type stone crusher is a good mechanical equipment for crushing materials of various hardness by using the extrusion and bending action of two jaw plates.

(3) The roller type stone crusher is a machine that uses the friction force of the roller surface to pull the material into the crushing area, so that the equipment can bear crushing or splitting.

(4) Compared with the hammer crusher, the impact crusher follows the continuous development of technology. The gap can be adjusted mechanically and hydraulically. The hydraulic system can easily adjust the local control system, and the gap can be adjusted through buttons or remote controls. The hammer crusher can only adjust the particle size by changing the screen bottom.

The ore crusher is mainly used for crushing in the industry. Compared with the grinding equipment, the crusher has more significant effect on large particle materials.

To sum up, I understand the principles of several models of ore crusher. I will tell you that there are users who need this equipment. Welcome to visit our factory.