In the field of grinding, we are not familiar with Raymond mill. It is a grinding equipment with a wide range of applications. Raymond mill has high grinding efficiency, wide range of finished particle size, stable and reliable operation, small footprint, and forms an independent production system. The output impact of equipment is also the focus of attention. Here is a brief analysis of the factors affecting the output of Raymond mill equipment, which are divided into?

1. The finer the fineness and particle size of the materials that affect the Raymond mill equipment, the lower the output. On the contrary, the higher the output. Due to the different specifications of the mills in use, the size of the particle size of the incoming materials has a great impact on the products and quality of the mill. If the particle size is small, the products and quality of the mill are high, and the power consumption is low. If the particle size is large, the products and quality of the mill are low, and the power consumption is high.

2. It affects the grindability of materials of Raymond grinding equipment. The grindability of materials refers to the degree of difficulty of grinding materials. The smaller the value, the better the grinding of materials, and the more difficult the grinding is. It is to compare the measured material with the standard sand by using the test small mill to reach the specified fineness value, and calculate the grinding time. The grinding time is the same as that of the standard sand, and it is difficult to grind if it is greater than 1; Less than 1 is easy to grind; The larger the ratio, the harder it is to grind; the smaller the ratio, the better it is to grind.

3. The factors affecting the moisture content of the materials fed into the Raymond mill. For the dry grinding method, the moisture content of the materials fed into the mill has a great impact on the product quality of the mill. The higher the moisture content of the materials fed into the mill, it is easy to cause full grinding or paste grinding, reduce the grinding efficiency, and the lower the mill output. Therefore, it is necessary to dry the materials with high moisture content before they are fed into the mill.

4. Factors affecting the temperature of materials entering the mill of Raymond grinding equipment: the temperature of materials entering the mill is too high, and the impact friction of the grinding body will cause excessive temperature in the mill, resulting in ball sticking, which will reduce the grinding efficiency and affect the output of the mill. At the same time, the thermal expansion of the mill cylinder will affect the long-term safe operation of the mill. Therefore, the temperature of the grinding material needs to be strictly controlled.