As is known to all, humic acid is a kind of soil improver and a macromolecular organic substance widely existing in nature. It can be used in agriculture, forestry, animal husbandry, petroleum, chemical industry, building materials, medicine and health, environmental protection and other fields. Humic acid can be made into humic acid fertilizer after being grinded by a grinder, which has a wide use value. Then, how to improve the output of humic acid mill during operation, and what methods are feasible? Let's briefly understand below.

Firstly, the moisture and temperature of the materials to be milled shall be strictly controlled and carefully reviewed, and the temperature of the materials to be milled shall be strictly controlled within the process requirements. In order to ensure the stable output of the mill, the comprehensive moisture content of the materials entering the mill shall be ≤ 1%.

Secondly, in order to ensure the grindability of the grinding materials by controlling the grindability of the grinding materials, first, the clinker with good grindability shall be produced as much as possible, and second, the mixture with good activity and grindability shall be selected.

At the same time, strictly control the particle size of grinding materials. When adopting the method of "more breaking and less grinding", the particle size of grinding materials must be kept below the internal control standard; At the same time, the particle size of the mixed materials is controlled and tracked, so that the particle size of various materials can be truly rationalized.

Then, control the ventilation in the mill. In order to ensure a virtuous cycle of ventilation in the mill, all ventilation pipes should be cleaned regularly under normal production conditions. The dust collector shall be cleaned once a week, and it shall be cleaned when the warehouse is full. For the ventilation of the pulverizer, the pulverizer efficiency shall be adjusted reasonably to ensure the stable improvement of the output and quality of the mill.

Finally, the fineness of the finished products is controlled. In the production quality control of 175 grinder, the fineness of cement is mainly controlled by sieve analysis method and cement specific surface area method. The 0.08mm sieve allowance shall be controlled within the range of 2.5% ~ 3%, and the cement specific surface area shall be controlled within the range of 360 ~ 375 ㎡ / kg.

Henan Yuhong Heavy Industry Co., Ltd., as a large-scale manufacturer specializing in producing 175 grinding equipment for many years, is a manufacturer that can stand the test in terms of equipment quality and word-of-mouth service. If necessary, you are welcome to visit and buy.